FS6

Individual fireproof shelter

The Fire Survival FS6 Individual Fireproof Shelter is a shelter constructed of fireproof materials for the protection of firefighting personnel from the convective and radiant heat of the flame. Its performance has been validated both in the laboratory and under real-life working conditions, providing protection in high-temperature environments for personnel who do not work near firefighting vehicles, such as helicopter-borne units or foot patrols.

Designed for

Establish a protective environment compatible with human life in situations of entrapment due to forest fires. Its features and use qualify it as personal protective equipment in the firefighting sector.

Protection against convective heat and thermal radiation

Establishes protection from convective and radiant heat for forest firefighters located inside the shelter.

Possibility of incorporating an individual breathing air bottle

Compatible with the use of individual breathing air supply devices.

FS6 – Individual fireproof shelter

Product Features

Special multi-layer fabric

The FS6's multi-layer aluminized fabric provides exceptional insulation against heat and thermal radiation, delaying the transmission of flame energy into the shelter. In addition, its Kevlar seams give it high mechanical resistance, increasing the shelter's reliability.

Highly compact

Carry bags are available in various sizes to fit most backpacks on the market.

Suitable for all sizes

Thanks to its 1.7 m length and 55 cm height and the positioning technique developed by ISK, it is capable of accommodating large firefighters, limiting the contact areas between the shelter fabric and the occupant.

Light

Only 1.5 kg.

FS6 – Individual fireproof shelter

Advantages of using this product

The FS6 individual shelter provides a protective environment compatible with human life thanks to its insulation against direct and convective heat and radiation produced by the flame front in situations where the FS2 collective shelter cannot be used.

Superior Protection

Provides effective protection against heat and fire.

Speed ​​of deployment

Thanks to its carefully designed folding system, flaps to prevent the entry of toxic gases, and handles, it can be deployed in just a few seconds with minimal technical complexity.

Reliability

Made with highly heat-resistant materials and laboratory tested.

Components included

Individual shelter

Carrying bag

Ver Ficha técnica
Request more information

Regulations

Regulation (EU) 2023/988

of the European Parliament and of the Council of 10 May 2023 on general product safety.

Directive 2009/104/CE

of the European Parliament and of the Council of 16 September 2009 on the minimum health and safety requirements for the use of work equipment by workers at work.

Royal Decree 1215/1997

of July 18, establishing the minimum health and safety provisions for the use of work equipment by workers.

The set of layers that make up the fabric has been certified by a notified body accredited by ENAC and in accordance with the UNE EN ISO 11612 and EN 469/A1 Standards, according to:

EN ISO 15025 / ISO 9151 / EN ISO 6942 / ISO 12127-1 / ISO 17493 / EN ISO 13934-1 / EN ISO 13937-2 / EN ISO 13935-2
Accredited Notified Body Number: 0161 Test Report Number: 2017EP3190

Level of performance obtained in fabric certification

In ISO 11612:

  • A1 (ISO 15025, Procedure A)
  • A2 (ISO 15025, Procedure B)
  • B2 (ISO 9151)
  • C4 (ISO 6942, Method B)
  • F3 (ISO 12127-1)
  • COMPLIES (ISO 17493)
  • COMPLIES (ISO 13934-1)
  • COMPLIES (ISO 13937-2)
  • COMPLIES (ISO 13935-2)

In 469/A1:

  • LEVEL 2 (ISO 9151)
  • LEVEL 2 (ISO 6942, Method B)
  • COMPLIES (ISO 17493)
  • COMPLIES (ISO 13934-1)
  • COMPLIES (ISO 13937-2)
  • COMPLIES (ISO 13935-2)

Solicitud de información para

FS6 - Refugio individual ignífugo