FS3

Fireproof tire protector

The FS3 Fireproof tire protector is a protective cover made of flame-resistant materials for protecting fire truck tires from the convective and radiant heat of the flame.

Its performance has been validated in both laboratory and real-world working conditions, ensuring reliable protection in high-temperature environments.

Designed for

Protect truck tires from ignition by convective heat or direct contact with the flame, preventing the combustion of these elements, which, on the one hand, would render the vehicle unable to escape the risk zone once the flame front has passed and, on the other, would generate persistent combustion associated with a large amount of gases harmful to humans.

Protection against direct fire and thermal radiation

Establishes protection against convective and radiant heat for the vehicle’s tires.

FS3 - Fireproof tire protector

Product Features

Special multi-layer fabric

The FS3's multi-layer aluminized fabric provides exceptional insulation against heat and thermal radiation, delaying the transmission of flame energy to the tire. In addition, its Kevlar seams give it high mechanical resistance, increasing its reliability.

Quick installation

Thanks to the magnets inserted into the flaps and the wide handles, the tire protectors are quick to install and can be done by a single person.

Carrying bag

Store the FS3 tire protector comfortably and safely with its carrying bag.

FS3 - Fireproof tire protector

Advantages of using this product

The FS3 tire protector increases the vehicle’s chances of survival in the event of a fire entrapment, allowing it to move to a safe area once the flame front has passed.

Superior Protection

Provides effective protection against heat and fire.

Speed ​​of deployment

Thanks to the magnets and its handles, it unfolds in seconds.

Preservation of escape routes

Helps increase the chances of escape to a safer area once the flame front has passed.

Includes the following components

Set of 4 tire protectors

Carrying bag

Ver Ficha técnica
Request more information

Regulations

Regulation (EU) 2023/988

of the European Parliament and of the Council of 10 May 2023 on general product safety.

Directive 2009/104/CE

of the European Parliament and of the Council of 16 September 2009 on the minimum health and safety requirements for the use of work equipment by workers at work.

Royal Decree 1215/1997

of July 18, establishing the minimum health and safety provisions for the use of work equipment by workers.

The set of layers that make up the fabric has been certified by a notified body accredited by ENAC and in accordance with the UNE EN ISO 11612 and EN 469/A1 Standards, according to:

EN ISO 15025 / ISO 9151 / EN ISO 6942 / ISO 12127-1 / ISO 17493 / EN ISO 13934-1 / EN ISO 13937-2 / EN ISO 13935-2
Accredited Notified Body Number: 0161 Test Report Number: 2017EP3190

Level of performance obtained in fabric certification

In ISO 11612:

  • A1 (ISO 15025, Procedure A)
  • A2 (ISO 15025, Procedure B)
  • B2 (ISO 9151)
  • C4 (ISO 6942, Method B)
  • F3 (ISO 12127-1)
  • COMPLIES (ISO 17493)
  • COMPLIES (ISO 13934-1)
  • COMPLIES (ISO 13937-2)
  • COMPLIES (ISO 13935-2)

In 469/A1:

  • LEVEL 2 (ISO 9151)
  • LEVEL 2 (ISO 6942, Method B)
  • COMPLIES (ISO 17493)
  • COMPLIES (ISO 13934-1)
  • COMPLIES (ISO 13937-2)
  • COMPLIES (ISO 13935-2)

Solicitud de información para

FS3 - Protector de neumáticos ignífugo